Render Cleaning London: Soft Washing for Rendered Homes

Render cleaning in London by soft washing: which render you have, why a jet scars it, why a biocide needs days to work, and why north walls go green again.

Covering Beckton, Blackwall, Canning Town, Custom House, Isle of Dogs, Limehouse, Poplar and Royal Docks in East London (E6, E14, E16).

Get a Quote

From £300 per job

In short

Render cleaning in London by soft washing, for rendered houses across the Isle of Dogs, Canning Town, Limehouse and the rest of East London. Soft washing means low pressure, a treatment that kills the growth, and then time, rather than a jet that scours the finish. We find out what your render is before we quote, because a painted wall, a through-coloured render and a pebbledash each need a different hand.

Render is a coat, not a wall. It is a thin layer bonded to the brick or block behind it, and everything about cleaning it follows from that. Scour the coat and you are taking away the finish you paid for. Force water through a crack in it and you are wetting the wall it was put there to protect.

Which render do you have?

Rendered houses in East London range from painted Victorian fronts to newer townhouses finished in a modern through-coloured coat, and they do not behave the same way when wet.

RenderHow to recognise itWhat it tolerates
Sand and cement, paintedSmooth or lightly textured, with a paint film you can see at chips and edgesGentle washing. The paint is the weak layer, and a jet can lift tired paint
Through-coloured one-coatThe colour runs right through, so a chip shows the same colour underneathLow pressure on a fan, after treatment
Thin-coat silicone or acrylicA fine, even texture, including on insulated wall systemsLow pressure on a fan. Check the system’s own maintenance terms
Pebbledash or dry dashSmall stones pressed into the surfaceNo pressure. Treatment, then time and weather

If you are not sure which you have, a close photo of a chipped corner usually settles it, and the people who installed it can tell you exactly.

Why soft washing suits render

The growth that turns render green or grey is alive. Algae, and the fungi and bacteria that come with it, settle into the texture of the finish. A jet strong enough to strip all of that off is strong enough to take the finish with it, which is why render makers say fan, not jet.

Soft washing turns the job around. A treatment goes onto the dry wall and kills the growth where it is attached, texture included. Then nothing happens for a while, and that wait is the method rather than a delay. Once the growth has died back it lets go, and a gentle rinse working down the wall carries it away without scouring the finish. On a dry dash wall, where makers say pressure washing is unsuitable, more of the work is left to the treatment and to time.

It also means our part is asking questions before anything goes on the wall: what the render is, what is planted underneath, whether there is a pond, and where the rinse water will run.

Algae, black streaks, and why north walls go green again

Growth needs water and shade more than anything else. The north face of a house, the wall shaded all day by a taller neighbour, the band beneath a dripping gutter: those are where render turns green first and where it returns first after cleaning.

Black streaks are a slightly different story. They tend to start at a sill, a coping or the end of a gutter, wherever water leaves an edge and runs down the face in the same path every time it rains. Some of that is dirt carried down by the water, some of it is dark growth following the wet line. Either way, the cure is partly cleaning and partly the edge itself. A sill with no drip groove is likely to streak again.

So the honest promise is a slower return, not a permanent clean. Killing the growth at the root buys more time than stripping it, and fixing the drip buys more still. If water is pouring down the front from a blocked gutter, get it cleared or repaired first.

Render cleaning on the Isle of Dogs, in Canning Town and Limehouse

Shade is the local factor worth knowing about. A lower house beside a taller block can sit in its shadow for much of the day, whether that is a terrace in Cubitt Town, a house near the new blocks in Canning Town or Custom House, or a home tucked between Limehouse Basin and the river. None of that is a reason the wall cannot be cleaned. It is a reason to expect the shaded face to need treating again sooner than the sunny one.

If your house has brick as well as render, the brick needs a different approach, set out on our brick cleaning page. For the whole outside of a house in one visit, start with exterior cleaning.

What we do

Identifying the render
Painted sand and cement, through-coloured one-coat, a thin textured silicone or acrylic finish, or pebbledash. They look similar from the street and tolerate very different treatment, so we check before anything gets wet, and ask whether you know who installed it.
Cracks and loose patches
Cracks, gaps around windows and areas where the render has come away from the wall should be found before any water goes on. Water and a cracked or loose render do not mix, and some of those need a renderer rather than a clean. How the wall is checked, and when, we'll confirm when we quote.
The treatment, applied to a dry wall
Render makers describe a biocidal wash suited to the render, applied to a dry wall and to the whole face rather than just the green patches. Which product goes on yours we'll confirm when we quote, and HSE is clear that any biocide must be used only as its label allows.
Dwell time, then a gentle rinse
The treatment is left to work before any rinse, and the rinse makers describe is low pressure on a fan, working down the wall, so loosened growth leaves without the finish going with it. Whether that means a second visit on your wall we'll agree when we quote.
Sills, copings and the run-off below
Window sills, copings and the strip under them get attention, since the dark streaks on a rendered front usually start where water leaves an edge. Plants at the foot of the wall need protecting from the treatment, and how that is done on yours we'll agree when we quote.

What this does not include

Worth reading before you book. If you need any of these, tell us and we will price it separately.

  • Repairing cracked or blown render. Cleaning cannot reattach render that has come away from the wall, and washing near it can make it worse. That is a renderer's job.
  • Repainting or recolouring render. If a painted wall is still patchy once it is clean, the paint has faded, and that needs a decorator.
  • Fixing what feeds the growth. Overflowing gutters, dripping overflows and missing drips under sills keep a wall wet, and cleaning does not repair them.
  • Scaffold tower or powered platform hire. It is not in the from price; if a tall rendered wall needs one, we'll say so and it is quoted separately before anything is booked.
  • A promise that it stays clean. Growth returns on shaded, damp walls, and we will tell you which faces are likely to go first before you book rather than after.
  • Insulated render systems with their own maintenance terms. If your render is part of a warranted system, check what the installer allows before anyone cleans it.
  • Cleaning products as standard. On render the treatment is the job, so whether we bring it, for a small extra charge, is agreed in the quote.

What moves the price

From £300 per job. These are the things that change it.

  • Which render it is. Pebbledash and some textured finishes cannot take pressure at all, so more of the job is treatment and waiting, and less is rinsing.
  • How much wall is affected, and how high it goes. A ground floor bay is a small job; a three-storey gable is not.
  • Access. It is decided house by house; if a wall needs a scaffold tower or platform, that is quoted before you book.
  • Whether the treatment can be left to work and rinsed on a later visit, or the wall needs a second round where growth is heavy.
  • The state of the render. Cracks and loose patches have to be worked around carefully, which takes longer.
  • Plants, paving and neighbours' property close to the wall that need covering or rinsing while the treatment is on.
  • Products. If we bring the treatment, that is a small extra charge on top of the clean.

How long it takes

Real timings, not best cases.

Single rendered bay or front wall, light growth
Half a day, plus dwell time
Two-storey rendered front
1 day, often over 2 visits
Whole rendered house, heavy growth
2 to 3 days over a week
Pebbledash or dry dash wall
Treatment visit, then weathering

The numbers, and where they come from

Fan, not jet
K Rend says its render can be washed with clean water and a mild detergent, with the washer set on fan application, not high power, because very high pressure washers can damage the render surface.
Source
Dry dash cannot take pressure
Weber's render cleaning guide tells owners to set a pressure washer to a fan rather than a jet action, and states that pressure washing is unsuitable for dry dash finishes.
Source
The treatment needs days
Weber describes its biocidal masonry wash going onto a dry wall, killing algae spores over 48 hours, and only then needing a low pressure rinse, with heavy cases repeated over another 48 hours.
Source
North walls need repeat treatment
Weber advises that on walls with heavy algae growth, such as north facing walls with limited sunlight, the treatment should be repeated every few years.
Source
A biocide is used as labelled
HSE says users must read and understand a biocidal product's label, that a biocide must not be used for any other purpose than the one authorised, and that the public should never use professional-only products.
Source
Biocides wear off
Historic England's research found the long-term efficacy of common biocides to be extremely limited, with early trial results showing some stopped being effective after three months.
Source

Where we do this in East London

One patch, covered every week: Tower Hamlets and Newham, London E6, E14, E16. Each area below has its own page. If your address is outside them we will say so rather than quote you for the travel.

Common questions

What is soft washing, and is it just a weak pressure wash?

Not really. A pressure wash relies on force to strip growth off. Soft washing relies on a treatment that kills the growth itself, applied at low pressure, and then on time while it works. The rinse at the end is gentle because by then most of the growth has already let go.

How much does render cleaning cost in London?

Render cleaning starts from £300 for a small job such as a single rendered bay or front. The type of render, the height of the wall and how heavy the growth is all move the price, so we quote after seeing it. Photos and a postcode give us a first idea.

Why did the green come back on my render so quickly?

Because the conditions that grew it are still there. A wall that faces north, sits in shade from a taller building or stays damp from a dripping gutter will recolonise first. A treatment slows that down for a while, not for good, and fixing the damp lasts longer than any product.

Can you clean pebbledash?

Yes, but not with pressure. Pebbledash and dry dash are not finishes to put a pressure washer on, so the job is mostly a treatment that kills the growth, and time for it to let go. Expect it to look better over days or weeks rather than the same afternoon.

Do you cover rendered houses on the Isle of Dogs and in Canning Town?

Yes. Our base is in Canary Wharf, so the Isle of Dogs is on our doorstep, and Canning Town, Custom House and Beckton are a short run across the Lea. Limehouse, Poplar and Blackwall are covered too. Send the postcode and a photo of the wall.

Is the treatment safe for my plants and pets?

Treat it with respect rather than fear. A biocide may only be used as its label allows, and the label says how to protect plants, ponds, people and pets. Tell us about ponds, vegetable beds and pets near the wall when you ask for a quote, so the product and the protection can be chosen around them.

Render Cleaning & Soft Washing

Fixed price · London

Get a quote